Sony PDW-850 Operation Manual page 251

Run Salvage A disc that requires salvage was
inserted. To record on the disc,
eject the disc, insert it again, and
execute salvage processing.
Salvage NG! Salvage processing failed.
For details, see "Handling of discs
when recording does not end
normally (salvage function)"
(page 75).
Salvage The loaded disc cannot be
XXXX salvaged by this unit. The
"XXXX" in the message is a code
for XDCAM devices that can
salvage the disc. Refer to the list
of device codes (see page 76) and
salvage the disc using one of the
indicated devices.
REC INHI.! The Write Inhibit tab of the disc is
in the recording disabled position,
or salvage processing needs to be
done on the loaded disc. Set the
tab to the recording enabled
position. Or eject the disc, insert it
again, and perform salvage
processing.
1080/50i This appears when mixed format
1080/25P recording mode is disabled and the
1080/59.94i current resolution or system
1080/29.97P frequency setting of this unit does
1080/23.98P not match the resolution or system
720/50P frequency of the inserted disc. To
720/59.94P carry out recording operations,
625/50i exchange the disc, or change the
525/59.94i resolution or system frequency
setting of this unit, or enable
mixed format recording mode.
HD422 1080 This appears when mixed format
HD422 720 recording mode is disabled and the
HD420 1080 current recording format of this
HD420 720 unit does not match the recording
IMX50 Clip format of the inserted disc. To
IMX40 Clip carry out recording operations,
IMX30 Clip exchange the disc, or change the
DVCAM Clip recording format of this unit, or
8CHx16 Clip enable mixed format recording
4CHx24 Clip mode.
2CHx16 Clip
System FREQ This appears when the current
system frequency of this unit does
not match the system frequency of
clips recorded on the inserted disc.
To carry out recording operations,
exchange the disc, or change the
system frequency of this unit.
Mixed REC! This appears when mixed format
recording mode is disabled and the
current recording format of this
unit does not match the recording
format of the inserted disc. To
carry out recording operations,
exchange the disc, or change the
recording format of this unit, or
enable mixed format recording
mode.
Index File! There is an unsupported index file
on the disc to which you are trying
to record. Exchange or format the
disc.
File System There is an unsupported file
system on the disc to which you
are trying to record. Exchange or
format the disc.
ILL. PLAY! An A/V phase error occurred
during playback. Stop the disc.
Lid Closed! The lid of the disc compartment
does not open. Check the lid.
Lid Open! The lid of the disc compartment is
not closed. Close it securely.
No Clip! There are no clips recorded on the
disc. Exchange for a recorded
disc.
No Disc! There is no disc loaded. Insert a
disc and try the operation again.
STOP ONCE! The operation is not possible
REC mode! while the disc is being played or
recorded. Stop the disc.
Loading! An operation was attempted while
Unloading! a disc was loading or unloading.
Wait for the disc to finish loading
or unloading and try again.
Disc Top! The operation is not possible
Disc End! because the disc is at the top or
end.
Clip Top! In single clip playback mode, the
Clip End! specified operation is not possible
because playback has reached the
top or end of the clip.
Operation Warnings 251