Sony PDW-850 Operation Manual page 160

No. Page
29 SOURCE SEL FRONT MIC SELECT
30 UMID SET
160 Menu List
Item Settings
MONO/STREO
(When stereo
microphone is
connected)
REC VIDEO SOURCE CAM/EXT
EXT VIDEO SOURCE VBS/SDSDI/HDSDI
WIDE MODE(EXT) AUTO/16:9
SETUP REMOVE 0.0%/7.5%
(When the COUNTRY
item is set to
"NTSC(J)AREA" or
"NTSC AREA")
COUNTRY CODE Blank/up to 4 characters For details, see "Setting the
ORGANIZATION Blank/up to 4 characters
USER CODE Blank/up to 4 characters
TIME ZONE 00 to 3F
Description
Input mode selection for front
microphone.
For details, see "Recording video
from external devices" (page 98).
When the input signal is SD,
select the method that determines
whether the signal is treated as a
wide signal.
AUTO: When wide picture
information is detected in the
input signal, treat the signal
as a wide signal and set the
up-converter operating mode
to squeeze mode. Record
wide picture information
when recording SD. When
wide picture information is
not detected, set the up-
converter operating mode to
edge crop mode and do not
record wide picture
information.
16:9: Always treat the signal as a
wide signal and set the up-
converter operating mode to
squeeze mode. Record wide
picture information when
recording SD.
Selects whether to modify the
setup level of input video signals.
7.5%: Remove the setup. (Select
when signals with 7.5%
setup are input.)
0.0%: Do not remove the setup.
(Select when signals without
setup are input.)
UMID data" (page 218).