Hdvf-20A Viewfinder (Optional) - Sony PDW-850 Operation Manual

Device
USB flash drive
Optional CBK-
WA01 Wi-Fi
Adaptor
Optional CBK-
WA100 Wireless
Adaptor
Before using this connector, you must set
ETHERNET/USB on the POWER SAVE page of
the OPERATION menu to "ENABL" (see page
212).

HDVF-20A viewfinder (optional)

qf
qg
PEAKING CONTRAST
ZEBRA
DISPLAY
ON HIGH
OFF OFF
MOMENT LOW
ASPECT
a Plug
Connect to the VF connector on the camcorder.
b Stopper
Prevents the viewfinder from coming off the
camcorder when it is slid from side to side.
26 Locations and Functions of Parts and Controls
Enables
Recording of proxy data (see
page 100)
Loading of planning metadata
(see page 134)
Saving and loading user
setting data (see page 220)
Making wireless LAN
connections (see page 213)
CBK-WA100 status indicator
Wireless LAN connection
1
2
3
4
5
6
7
8
9
BRIGHT
0
TALLY
qa
qs
qd
c Camera operator tally indicator
Lights up while camcorder is recording. This
indicator can be covered when not in use.
This indicator also flashes to indicate warnings, in
the same manner as the tally indicator and the
REC indicator in the viewfinder.
d Eyecup
e Indicators and status display
For details, see "Status display on the viewfinder
screen" (page 27).
f Diopter adjustment ring
Allows for optimal focus adjustment.
g Tally indicator
Lights up while camcorder is recording. Set the
TALLY switch to OFF when not in use. The
brightness can also be adjusted with the TALLY
switch.
This indicator also flashes to indicate warnings, in
the same manner as the camera operator tally
indicator and the REC indicator in the viewfinder.
h PEAKING control
Turning this control clockwise adjusts the picture
sharpness, and makes focusing easier. This
control has no effect on the output signals of the
camcorder.
i CONTRAST control
Adjusts the contrast of the screen. This control
has no effect on the output signals of the
camcorder.
j BRIGHT control
Adjusts the brightness of the screen. This control
has no effect on the output signals of the
camcorder.
k TALLY switch
Controls the tally indicator located on the front of
the viewfinder.
HIGH: The tally indicator brightness is set to
high.
OFF: The tally indicator is disabled.
LOW: The tally indicator brightness is set to low.
l ZEBRA (zebra pattern) switch
Controls the zebra pattern display on the
viewfinder screen as follows.
ON: A zebra pattern appears and stays.