Multi Folder (Fold) Adj. \ 06 Gate Fold Position Adj - Konica Minolta bizhub PRO C6501 User Manual

Adjustment
3.5.8

03 Multi Folder (Fold) Adj. \ 06 Gate Fold Position Adj.

Perform this adjustment for the folding positions in Gate folding mode pro-
cessed by the Folding Unit FD-503.
Reminder
When adjusting Single Fold, Double Fold and Triple Fold at a time, be
sure to start with the Single Fold adjustment.
The baseline of Single Fold is calculated from the edge of the sheet, while
that of Double Fold is calculated from the position of the first fold line, and
that of Triple Fold is calculated from the position of the second fold line,
therefore a distance (a), distance (b) and distance (c) in step 5 will be al-
tered by changing the position of any fold position.
To specify Gate Fold Position Adj.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then
[06 Gate Fold Position Adj].
The Gate Fold Position Adjustment Screen will be displayed.
bizhub PRO C6501
3
3-53