Konica Minolta bizhub PRO C6501 User Manual page 133

Adjustment
3
Display the required size key using up/down arrow keys to select the
paper size of the body set to be attached with the cover.
4
Touch [COPY] tab.
The Copy Screen will be displayed.
5
Select the PB tray or desired main body tray, then press [Start].
A sample pattern of perfect-bound book will be output.
6
Check that the horizontal scanning direction is equal on every page of
the body set.
If it is not equal on all pages, proceed to the next step.
If unequalness appears on the latter half of body pages while the
former half shows equalness, use [09 Clamp CD Width Adjustment].
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10
Touch [Return] to restore the Perfect Binder Adjustment Menu Screen.
bizhub PRO C6501
3
3-97