Konica Minolta bizhub PRO C6501 User Manual page 157

Adjustment
5
Select the folding method to be adjusted, then press [Start] on the
control panel.
A sample pattern will be output.
6
Check the amount of staple pitch.
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The 2 Position Staple Pitch Adjustment Screen will be restored.
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: +120 to +160, 1 step = 1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10
If adjustment in any other folding is required, repeat steps from 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
bizhub PRO C6501
3
3-121