Konica Minolta bizhub PRO C6501 User Manual page 54

3
4
Select A3 w/11" × 17" w paper, then press [START].
The sample pattern will be output.
5
Check the magnification in the direction of paper feed by comparing
the output and the original.
6
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
The Scanner FD-Mag. Adjustment Screen will be restored.
7
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -40 to +40, 1 step = 0.05%
8
Repeat the adjustment steps from 3 to 7 until the desired result is ob-
tained.
9
Touch [Return] to restore the Adjustment Menu Screen.
3-18
Adjustment
bizhub PRO C6501