Density Unevenness Adjustment - Konica Minolta bizhub PRO C6501 User Manual

Adjustment
3.11

05 Density Unevenness Adjustment

Adjust the density unevenness of printed images in crosswise direction to
the paper feed direction.
Prerequisites
0 The Automatic Gamma Adjustment (page 3-20, page 6-64) should be
performed in advance.
0 This adjustment will be required afresh when the screen type selection
has been changed. As the density unevenness may vary according to
machine conditions, occasionally check whether the current adjustment
value is appropriate or not.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [05 Density Unevenness Adj.].
The Density Unevenness Adjustment Setting Screen will be displayed.
bizhub PRO C6501
3
3-127