Scan Initial Setting - Konica Minolta bizhub PRO C6501 User Manual

5
5.3.2

02 Scan Initial setting

Besides the factory default setting (Full Auto), you may set the scanning
condition as the initial setting as desired.
To specify the scanning conditions set here to be used as the initial setting
when the Reset function is used, select [User Setting \ 01 System Setting \
04 Reset Setting \ 02 Mode Reset Setting], and then select [Initial] for the
Reset button function.
Procedure
1
Follow the procedure on page 5-3 to display the User Setting Menu
Screen.
2
Touch [02 Initial Setting], and then [02 Scan Initial setting].
5-42
User Setting
bizhub PRO C6501