3. INSPECTION/ADJUSTMENT
X-Town250/300 ABS
CLUTCH SHOE WEAR
Start engine and check the clutch operation
by increasing the engine speed gradually.
If the motorcycle tends to creep or the
engine stop, check the clutch shoes for wear
and replace if necessary.
SUSPENSION
FRONT
Check
the
action
of
the
front
shock
absorbers by compressing them several
times.
Check the entire shock absorber assembly
for oil leaks, looseness or damage.
REAR
Each shock absorber(4) on your scooter has
5 spring preload adjustment positions for
different load or riding conditions.
Use a pin spanner(5) to adjust the rear shock
spring preload. Position 1 is for light loads
and smooth road conditions. Position 3 to 5
increase spring preload for a stiffer rear
suspension and can be used when the
scooter is heavily loaded.
Be certain to adjust both shock absorbers to
the same spring preload positions.
3-10