Remote Controls - Martin Atomic 3000 User Manual

Remote controls

This section describes how to operate the Atomic 3000 with optional
Martin remote controls.
MC-1 remote control
The MC-1 remote control is no longer available from Martin™, but many of
these small, robust units are still in circulation.
When connected to the Martin MC-1 remote control, the Atomic 3000
flashes with fixed rate, duration, and intensity when the Strobe button is
pressed on the MC-1.
Pin 2 on the Mode DIP switch must be OFF. No other DIP switch setting is
necessary.
Connect the Atomic 3000 to the MC-1 as if it were a controller. See "Data
connection" on page 11.
18 Remote controls
6
Atomic 3000 user manual