Martin Atomic 3000 User Manual page 8

Rigging the fixture
Warning: Always use a secure means of secondary attachment!
Before installing, make sure that:
• the attachment hardware is in good condition and designed to bear at
least 10 times the fixture's weight,
• the structure can support at least 10 times the weight of all installed
fixtures, clamps, cables, auxiliary equipment, etc.;
• the fixture will be located at least 1 meter (39 in.) away from the surface
to be illuminated, at least 0.5 meters (20 in.) from any combustible
materials, and well away from flammable materials;
• the clearance around the air vents is at least 0.1 meters (4 in.), and
• no one is located under the work area.
If clamping the fixture:
1. Fasten the clamp securely to the bracket with a metric grade 8.8 or
2. Working from a stable platform, clamp or fasten the fixture securely to
3. Install a safety cable that is approved for the weight it must support
4. Loosen the mounting bracket and adjust the fixture to the desired
5. Connect and arrange the power and data cables.
8
better M12 bolt and lock nut, or as recommended by the clamp
manufacturer.
the structure.
around the support and bracket.
angle.
Preparation for use Atomic 3000 user manual