Martin Atomic 3000 User Manual page 15

per second, or a flash duration of 0.05 seconds (50 ms) and a flash rate of
20 flashes per second.
In 3- and 4-channel DMX mode, the intensity of the blinder effect is
controllable on channel 1. Lamp power is electronically regulated to
prevent the lamp from overheating. The intensity falls as power is
reduced.
Single flash
To trigger single flashes, start with the intensity and flash rate at 0 and
then set an intensity on channel 1. When the value of channel 1 changes,
the light will flash once with the programmed intensity, duration, and
effect.
Atomic 3000 user manual Controller operation 15