Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Martin PAR 2 RGBW Zoom
Summary of Contents for Martin PAR 2 RGBW Zoom
-
Page 1: User Manual
PAR 2 RGBW Zoom User Manual Professional Entertainment Technology... - Page 2 The Martin logo, the RUSH by Martin logo, the RUSH by Martin name, the Martin name and all other trademarks in this document pertaining to services or products by Martin Professional or its affiliates and subsidiaries are trademarks owned or licensed by Martin Professional or its affiliates or subsidiaries.
-
Page 3: Table Of Contents
Table of contents Safety information ..................... 4 Introduction ....................... 9 Before using the product for the first time ............. 9 Physical installation ..................10 Fastening the fixture to a flat surface ............10 Mounting the fixture on a truss ..............10 Securing with a safety cable ............... -
Page 4: Safety Information
Install, operate and service RUSH by Martin™ products only as directed in their user manuals, or you may create a safety hazard or cause damage that is not covered by product warranties. - Page 5 Before using the fixture, check that all power distribution equipment and cables are in perfect condition and rated for the current requirements of all connected devices. Use only Neutrik PowerCon cable connectors to connect to the fixture’s power sockets. RUSH PAR 2 RGBW Zoom™ User Manual...
- Page 6 MAINS IN input socket, but do not link more than: • eight (8) RUSH PAR 2 fixtures in total at 100-120 V, or • eighteen (18) RUSH PAR 2 fixtures in total at 200-240 V. The voltage and frequency at the MAINS OUT socket are the same as the voltage and frequency applied to the MAINS IN socket.
- Page 7 If the fixture is installed in a location where it may cause injury or damage if it falls, install as directed in this manual a secondary attachment such as a safety cable that will hold the RUSH PAR 2 RGBW Zoom™ User Manual...
- Page 8 Do not modify the fixture in any way not described in this manual or install other than genuine RUSH by Martin™ parts. Refer any service operation not described in this manual to a qualified technician.
-
Page 9: Introduction
Introduction The RUSH PAR 2 RGBW Zoom™ is a bright single-lens LED PAR Can with fully premixed color from 12 RGBW LEDs and a 10 to 60° motorized zoom. It offers electronic dimming and strobe and features a bracket for floor or truss mounting. -
Page 10: Physical Installation
3. Fold the legs of the mounting bracket together and bolt a rigging clamp securely to the mounting bracket. The bolt used must be M12, grade 8.8 steel minimum. It must pass through both mounting bracket legs and be fastened with a self-locking nut. RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 11: Securing With A Safety Cable
Do not insert or remove live Neutrik PowerCon connectors to apply or cut power, as this may cause arcing at the terminals that will damage the connectors. RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 12: Linking Fixtures To Power In A Chain
Using 14 AWG or 1.5 mm cables from Martin™, you can link: • Maximum eight (8) RUSH PAR 2 RGBW Zoom fixtures in total at 100- 120 V, or • Maximum eighteen (18) RUSH PAR 2 RGBW Zoom fixtures in total at 200-240 V. -
Page 13: Fixture Overview
Confirm the selected function 4 – 5-pin XLR DMX input/output sockets 5 – Primary (mains power) fuse F1 The T 6.3A fixture fuse is located in a fuse holder next to the power input/output connectors. RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 14: Control Data Link
Use shielded twisted-pair cable designed for RS-485 devices: standard microphone cable cannot transmit control data reliably over long runs. 24 AWG cable is suitable for runs up to 300 meters (1000 ft.). Heavier gauge RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 15: Connecting The Dmx Data Link
ENTER button, or if you want to return to the next highest level in the menu structure without making a change, press the MENU button. To exit the menus, press and hold the MENU button. RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 16: Dmx Function Settings
9-channel mode – Full-range dimming with 16-bit fine control, shutter/strobe effects, individual control of red, green, blue and white channels for color mixing, ‘color wheel’ effect and zoom. RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 17: Dimming Curves
You can decide how the fixture should behave if you are controlling the fixture via DMX and you stop sending the DMX signal. 1. Select BLACKOUT and press ENTER. The currently set blackout mode will blink in the display. RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 18: Display Panel Backlight Sleep Mode
To perform a complete test of all of the fixture’s effects: 1. Select FIXTURE TEST and press ENTER to confirm. The automatic test will run. 2. To stop the test and return to a higher level of the menu structure, press MENU. RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 19: Single Stand-Alone Scene
To check the onboard temperature of the fixture: 1. Select TEMP and press ENTER. The display will show the temperature of the unit. 2. To return to a higher level of the menu structure, press MENU. RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 20: Reset
2. To return to a higher level of the menu structure, press MENU. Reset To reset the fixture to its factory default settings: 1. Select RESET and press ENTER to confirm. 2. The fixture will now reset to its default settings. RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 21: Effects
Color 8 Color 9 Color 10 Color 11 Color 12 Color 13 Color 14 Color 15 Color 16 Color 17 Color 18 Color 19 Color 20 Color 21 Color 22 Color 23 Color 24 RUSH PAR 2 RGBW Zoom™ User Manual... - Page 22 Overall intensity can be adjusted 0-100% using electronic dimming in 9- channel mode. Two channels can be used to control intensity: the first gives coarse 0-100% control, the second gives 16-bit fine adjustment. RUSH PAR 2 RGBW Zoom™ User Manual...
-
Page 23: Maintenance
100 hours of operation to see whether cleaning is necessary. Check again at frequent intervals. This procedure will allow you to assess cleaning requirements in your particular situation. If in doubt, consult your RUSH by Martin dealer about a suitable maintenance schedule. -
Page 24: Fuse Replacement
Refer any service or repair operation not described in this manual to an authorized RUSH by Martin™ service technician. Do not try to carry out such an operation yourself, as doing so may present a health or safety risk. It may also cause damage or malfunction, and it may void your product warranty. -
Page 25: Dmx Protocol
White 0 100% Fade Color wheel effect (color presets) 0-10 Open (white) 11-15 Color 1 16-20 Color 2 21-25 Color 3 Snap 26-30 Color 4 31-35 Color 5 36-40 Color 6 41-45 Color 7 RUSH PAR 2 RGBW Zoom™ User Manual... - Page 26 215-221 Stop (wheel stops at current position) 222-243 CCW rotation slow fast Random colors 244-247 Random color, fast 248-251 Random color, medium 252-255 Random color, slow 0-255 Zoom wide narrow Fade RUSH PAR 2 RGBW Zoom™ User Manual...
-
Page 27: Control Menus
Zoom Dimmer Strobe Auto Test Automatic test of all effects Temp. Display fixture’s current temperature Fixture time Display total operation time Display currently installed firmware Firmware Version version Reset Force a fixture reset RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 28: Troubleshooting
Check that all components on DMX link use standard DMX polarity. Attempt to control the fixture with another DMX control device. Move or shield link if it is close to an unshielded high- voltage installation. RUSH PAR 2 RGBW Zoom™ User Manual... -
Page 29: Specifications
Light source ........12 x 10 W RGBW Osram Ostar LEDs Minimum LED lifetime ....50 000 hours (to >70% luminous output)* Beam angle ..................10° - 60° *Figure obtained under manufacturer´s test conditions RUSH PAR 2 RGBW Zoom™ User Manual... - Page 30 EU EMC ..........EN 55015, EN 55103-1, EN 55103-2, ......... EN 61000-3-2, EN 61000-3-3, EN 61547 US safety (pending) ................ UL 1573 US EMC ..............FCC Part 15 Class A Canadian safety (pending) ........... CSA C22.2 No. 166 RUSH PAR 2 RGBW Zoom™ User Manual...
- Page 31 Related Items RUSH Software Uploader 1™ ..........P/N 91611399 Ordering Information RUSH PAR 2 RGBW Zoom™ in cardboard box ..... P/N 90280040 Specifications are subject to change without notice. For the latest product specifications, see www.martin.com RUSH PAR 2 RGBW Zoom™ User Manual...
- Page 32 Disposing of this product RUSH by Martin™ products are supplied in compliance with Directive 2012/19/EC of the European Parliament and of the Council of the European Union on WEEE (Waste Electrical and Electronic Equipment), where applicable. Help preserve the environment! Ensure that this product is recycled at the end of its life.
- Page 36 Innovation Quality Performance...