Remote Control; Wired Remote Control; 4-Channel Wireless Remote Control And Receiver - Martin Rush SM 650 User Manual

Remote control

The SM 650 smoke machine comes with 2 remote control options: a wired remote
control and a 4-channel wireless remote control. There are two identical sockets
on the rear panel so that both remote controls may be connected and used at the
same time.

Wired remote control

The wired remote control has a 4.5 m (15 ft.) cable that plugs into either remote
control socket on the rear panel. The status LED on the remote control is off while
the machine is heating and lights green when the smoke machine is ready for
use.

4-channel wireless remote control and receiver

The 4-channel wireless remote control transmitter (shown below to left) has a
range of 30 meters (100 feet). It provides individual control of up to 4 smoke
machines and simultaneous control of an unlimited number of machines in up to 4
groups.
The remote control receiver (shown above to right) connects to a remote control
socket on the rear panel. It has green (ready) and red (heating) LEDs to show the
machine's status.
The DIP switch on the side of the receiver sets the remote control button that
triggers the machine. Flip the switch that corresponds to the desired transmitter
button to the ON position. Flip all other switches to OFF. The smoke machine
responds to all buttons for which the DIP switch is in the ON position.
TM
12 RUSH SM 650 User Manual