Dab Mode - Roberts Stream 218 Manual List

Should you wish to use your radio for DAB reception in a new location, or if no stations
were detected during the initial scan, you can follow this procedure to allow your radio to
1. Press Mode as needed to select the DAB Radio mode.
2. Press Menu.
3. Choose 'Scan'.
4. Press Tuning. The display will show 'Scanning' and your radio will perform a scan
of the Band III DAB frequencies. As new stations are found the station counter will
increase and stations will be added to the list. The bar graph indicates the progress
of the scan.
Manual tuning allows you to tune your radio to a particular DAB frequency in Band III.
Any new stations found will be added to the station list. This function can also be used
to assist the positioning of the telescopic aerial or the radio to optimise reception for a
1. When in DAB mode, press Menu.
2. Choose 'Manual tune'.
3. Choose the required DAB channel. Press Tuning.
When the radio has tuned, the display shows the channel number and frequency, and
the name of the DAB multiplex found (if any). A bar graph shows the signal strength and
is useful if you need to reposition the radio or its aerial. The minimum signal marker 'I'
which separates the left and right parts of the signal graph shows the minimum signal
level required for satisfactory reception. Any new radio stations found on the tuned
DAB multiplex will be added to the list stored in the radio.
4. Press Menu or Back to choose a different frequency.
5. Press Menu or Back a second time to access the main DAB menu then select 'Station
list' to return to normal tuning.
DAB Radio
DAB
Station list
Scan
Manual tune
Prune invalid
DRC
Station order
Scan
Stations: 24
Scanning
DAB
Station list
Scan
Manual tune
Prune invalid
DRC
Station order
Manual tune
11B 218.640 MHz
11C 220.352 MHz
11D 222.064 MHz
12A 223.936 MHz
12B 225.648 MHz
12C 227.360 MHz
12:34
DAB
Heart
11C 220.352 MHz
Strength:
46