Mounting The Frame - Gamma 6900 Els Owner's Manual

MOUNTING THE FRAME

Mounting Stand Adjustment
Position the racquet frame over the mount-
ing stands and adjust the spacing between
the stands so the posts of the frame support
slides fit inside the head of the racquet. By
turning one of the knobs located at either end
of the turntable counter clockwise the stands
move closer together. Turning clockwise will
increase the separation between the stands.
With the stands positioned so the posts of the
frame support slides are completely within
the head of the racquet frame, turn one of
the knobs clockwise until they contact the
inside of the racquet head at 6 and 12 o'clock.
Securing the Shoulder Supports
To secure the racquet frame with the shoulder
supports, rotate the large adjustment knobs
on the outside of the mounting stands clock-
wise to bring the mounting arms together.
Adjust until firm contact is made between the
shoulder supports and the frame.
The tear drop shaped holes towards the back
of the shoulder supports are handy for holding
the loose end of the string while tensioning
the string. Simply insert the loose end into
the tear drop shaped holes and slide the
string toward the point of the hole.
Shoulder Support Adjustment
The shoulder supports are designed to
rotate and can be adjusted to provide
maximum support to the racquet frame.
Rotate the support so that the pads
contact the frame squarely when the
arms are closed against the racquet.
Should the shoulder supports block
string holes, adjust the frame sup-
port slides to re-position the racquet
between the arms so the shoulder
supports make contact with the racquet
between grommet holes.
12