Mounting The Frame - Gamma 5800 Els Owner's Manual

MOUNTING THE FRAME

of the racquet frame. Securely tighten the lock bolt of the second Mounting Stand. Caution:
To avoid racquet damage, the Frame Supports should not contact the racquet prior to locking
down the Mounting Stands.
Adjusting the Frame Mounting
Stands
Loosen the lock bolts of the frame Mounting
Stands and space them apart with the Frame
Support Slides separated by the approximate
length of the racquet head. Although it is not
required, it is good practice to center the
Mounting Stands on the
one of the stands in position by tightening
the 6 mm Hex Head lock bolt and position
the other stand until the Frame Support
Slide is positioned near the inside surface
Tightening the Frame Supports
Tighten the Frame Support Slides by turn-
ing the Adjustment Knob clockwise until it is
snug against the racquet frame and slight
resistance is felt.
Caution: Overtightening the Center Supports
will stretch the head of the racquet and could
cause racquet damage.
Frame Shoulder Support Adjustment
With the Shoulder Supports free to swivel
in their mountings, simultaneously rotate
the Shoulder Support Adjustment Knobs
clockwise until both Shoulder Supports gently
and squarely contact the frame.
17
Turntable. Lock