Gamma 6900 Els Owner's Manual page 15

STRINGING THE FRAME
To apply tension to a string, push the tension
switch or the foot pedal. The string gripper will
rotate and slowly apply tension to the string.
When the set tension has been attained,
the gripper will stop rotating and the display
will flash. As the tensioned string stretches,
the gripper will continue to pull and rotate
intermittently, maintaining the set tension.
To release the string after clamping, push the
tension switch or foot pedal. If the string grip-
per does not release the string, depress and
hold the return button to release the string.
Clamping the First Main String
Secure the tensioned main string using the
free fixed clamp. Repeat the procedure for
all of the remaining main strings and tie off
following the racquet manufacturers recom-
mendations.
Follow the manufacturer's recommended
stringing pattern for one or two piece stringing.
This will determine the starting point for the
cross strings. If applicable, tie the first cross
string using an appropriate starting knot.
Weaving the Cross Strings
Weave the cross strings over and under the
main strings being careful to alternate the
weave direction of each consecutive cross
string so as to be opposite of the previously
installed cross string.
15