Mounting The Frame - Gamma Progression 602FC Owner's Manual

MOUNTING THE FRAME

5
Adjusting the Frame Support Posts
Place the racquet frame over the center posts and onto
the frame support. Loosen the lever lock bolt on one
support post. Slide the post outward until the center
support of the racquet support slide is positioned near
the inside surface of the racquet frame. Securely tighten
the lever lock bolt.
Adjust the opposite post using the same procedure.
Caution: To avoid racquet damage, the center posts
should not contact the racquet prior to fixing the support
posts.
Tightening the Center Supports
Tighten the Center Supports by turning the adjustment
knob clockwise until slight resistance is felt.
Caution: Overtightening the Center Supports may cause
racquet damage.
Frame Shoulder Support Adjustment
Being sure the shoulder supports are free to swivel in
their mountings, simultaneously rotate the shoulder
support adjustment knobs clockwise until both shoulder
supports gently and squarely contact the frame.