Vega VEGAPULS 63 Operating Instructions Manual page 51

Gas phase Temperature
200 °C/392 °F
Hydrogen
100 °C/212 °F
Water (saturated
steam)
180 °C/356 °F
Water (saturated
steam)
Ambient conditions
Ambient, storage and transport tem-
perature
Process conditions
For the pressure stages of the vessel pressure, you also have to note the specifications
on the type label. Always the lowest value is applicable.
Pressure stage, depending on the process fitting
- Bolting according to DIN 11851 and
11864-2, hygienic fitting LA and LB
vessel pressure depending on the process fitting
- flange up to 2" (from 300 lb)/DN 50
- Flange from 3" (from 300 lb), DN 80
- Tuchenhagen Varivent
- SMS
Vessel pressure relating to the flange
nominal stage
Process temperature, depending on the material of the antenna encapsulation
(measured on the process fitting)
- TFM-PTFE encapsulated
- TFM-PTFE encapsulated (low tem-
perature version)
- PFA encapsulated
- TFM-PTFE hygienically encapsu-
lated, process seal FKM (Viton)
- TFM-PTFE hygienically encapsu-
lated, process seal EPDM
VEGAPULS 63 • 4 ... 20 mA/HART - four-wire
1 bar/14.5 psig
-0.02 %
0.20 %
-
8)
Not suitable for SIL applications.
8)
10 bar/145 psig
0.05 %
-
2.1 %
-40 ... +70 °C (-40 ... +158 °F)
PN 16
-100 ... 1600 kPa/-1 ... 16 bar (-
-14.5 ... 232 psig)
-20 ... 1600 kPa/-0.2 ... 16 bar (-
-2.9 ... 232 psig)
-100 ... 1000 kPa/-1 ... 10 bar (-
-14.5 ... 145 psig)
-100 ... 600 kPa/-1 ... 6 bar (-14.5 ... 87 psig)
see supplementary instructions manual
"Flanges according to DIN-EN-ASME-JIS"
-40 ... +150 °C (-40 ... +302 °F)
-170 ... +150 °C (-274 ... +302 °F)
-40 ... +150 °C (-40 ... +302 °F)
-25 ... +130 °C (-13 ... +266 °F)
-40 ... +130 °C (-40 ... +266 °F)
10 Supplement
50 bar/725 psig
0.37 %
-
-
51