Vega VEGAPULS 63 Operating Instructions Manual page 26

Radar sensor for continuous level measurement of aggressive liquids or with hygienic requirements 20 ma/hart - four-wire

Hide thumbs Also See for VEGAPULS 63:

Table of Contents

5 Connecting to power supply

Internal check of the electronics

Indication of the instrument type, the ﬁrmware as well as

the sensor TAGs (sensor designation)

Output signal jumps brieﬂy (approx. 10 seconds) to the set

fault current

Then the corresponding current is outputted to the cable (the

value corresponds to the actual level as well as the settings

already carried out, e.g. factory setting).

VEGAPULS 63 • 4 ... 20 mA/HART - four-wire

Table of Contents

Show Quick Links

Table of Contents