Vega VEGAPULS 63 Operating Instructions Manual page 15

Inflowing medium
VEGAPULS 63 • 4 ... 20 mA/HART - four-wire
1
> 200 mm
Fig. 4: Mounting on round vessel tops
1
Reference plane
2
Vessel center or symmetry axis
In vessels with conical bottom it can be advantageous to
mount the sensor in the center of the vessel, as measurement
is then possible down to the lowest point of the vessel bottom.
Fig. 5: Vessel with conical bottom
Do not mount the instruments in or above the filling stream.
Make sure that you detect the product surface, not the
inflowing product.
4 Mounting
2
15