Vega VEGAPULS 63 Operating Instructions Manual page 36

6 Set up with the indicating and adjustment module PLICSCOM
Optional settings
36
Menu item
HART mode
Factory setting
Like basic adjustment, furthermore special parameters are
reset to default values.
Pointer
The min. and max. distance values are reset to the actual
value.
Additional adjustment and diagnosis options such as e.g.
scaling, simulation or trend curve presentation are shown in
the following menu schematic. You will find a detailed
description of these menu items in the operating instructions
manual "Indicating and adjustment module".
Special parameters are parameters which are set customer-specifically on
3)
the service level with the adjustment software PACTware.
Reset value
no reset
3)
VEGAPULS 63 • 4 ... 20 mA/HART - four-wire