Defining Favorite Plate Types - Qiagen QIAcube ht User Manual

4. To display plates that are not tip racks, select "QIAGEN"
5. From the "Select Plate Type" drop-down list, select type
6. Select a plate from the "Plate" list.
7. When the correct plate has been chosen, click "OK" to
5.8.3

Defining favorite plate types

Plates that you commonly use can be added to the
"favorites" list for quick searching.
Add a plate to the favorites list, as follows:
1. Open the software workspace (see Section 5.3, page 5-6).
2. Right-click the plate that is to be specified as a favorite.
3. From the menu that appears, select "Change plate type".
QIAcube HT User Manual 07/2013
and "Other" in the "Filter to" panel.
For more information about tip racks, see Section 5.9,
page 5-29.
of plates to be displayed in the "Plate" list.
Only the options that are appropriate for the selected
position are displayed.
If you can not find the plate you want to use, contact
QIAGEN Technical Services.
When a plate type is chosen, manufacturer and part
number details (if available) are displayed in the center
right window to enable plate identification.
When selecting capture plates in the A1 vacuum position,
catalog numbers are displayed with graphics for the
matching adapters. These catalog numbers are
embossed on the actual items for easy identification.
apply the changes and close the window.
The "Plate Configuration" window appears.
QIAcube HT Software
5-27