Enabling Access Control; Managing User Groups - Qiagen QIAcube ht User Manual

QIAcube HT Software
When user access control is disabled, all users are given
"Manager" access.
Upgrading the software does not affect user access control.
5.12.3

Enabling access control

Upon installation, the QIAcube HT Software user access
control features are disabled and all users have "Manager"
access (see the previous section for user group descriptions).
A Manager enables the user access control with
"Options/User management/Enable access control".
You can toggle between enabled and disabled states. A tick
appears next to "Enable access control" when this option is
enabled.
If the access control is enabled it is directly active. Be careful
to enable the access control only if you are a Manager.
5.12.4

Managing user groups

The user groups will always be managed on the local laptop
where the software is installed even if you are connected to a
domain.
If you are a Manager you can use the management functions
on the menu bar "Options/User Management/Users &
Groups" to change the groups membership. You need the
right to elevate to an Administrator to really save your
changes.
To set the groups membership of users on the laptop
computer:
1. Open the "Options" menu, and select "User
2. The "Users & Groups" window appears.
3. Select the user from the "Users" panel.
5-64
management/Users & Groups".
QIAcube HT User Manual 07/2013