Qiagen QIAcube ht User Manual page 78

QIAcube HT Software
Menu item
User
management
Calibration
management
Robot setup
Run settings
Advanced
settings
Change plate
type
Change
accessory
Change plate
function
5-14
Description
Control access of software functions for
different classes of users. For more
details, see Section 5.12, page 5-61.
Transfer calibration and other settings
from one laptop to another. For more
details, see Section 5.13.4, page 5-80.
Configure robot-specific hardware
parameters and access to wizards for
performing various robotic calibrations.
See Sections 5.12.5 and 5.17 (pages
5-66 and 5-114, respectively).
Specify global options relating to runs.
Access additional options for instrument
control and specialized applications. Only
change these settings as directed by your
QIAGEN Field Service Specialist. See
Appendix F for more information.
Change the type of the selected plate. For
more details, see Section 5.8.2, page
5-26.
Change the accessory assigned to the
selected plate. For more details, see
Appendix G.
Change the function of the selected plate.
For more details, see Section 5.8.4,
page 5-28.
QIAcube HT User Manual 07/2013