Disposal; Manufacturer's Warranty - Tools - Hilti UD 16 Operating Instructions Manual

Fault
The power tool doesn't achieve
full power.
The drill bit makes no progress.
The drill bit doesn't rotate.
en

10 Disposal

Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials
must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back your old power tools or appliances for recycling. Please ask your Hilti customer service department or
Hilti representative for further information.
Return materials for recycling
For EC countries only
Disposal of electric tools together with household waste is not permissible.
In observance of the European Directive on waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electrical appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.

11 Manufacturer's warranty - tools

Please contact your local Hilti representative if you have
questions about the warranty conditions.
26
Possible cause
The control switch is not pressed
fully.
The forward/reverse switch is set to
reverse rotation.
The drill bit is blunt or damaged.
The chuck is not tightened securely.
Remedy
Press the control switch as far as it
will go.
Set the forward/reverse switch to for-
ward rotation.
Hone the drill bit or replace it.
Retighten the chuck.