Disposal - Hilti SF(H) 14-A Operating Instructions Manual

Fault
The power tool or
the battery becomes
very warm.
en
LED 1 blinks.

10 Disposal

CAUTION
Improper disposal of the equipment may have serious consequences: the
burning of plastic components generates toxic fumes which may present
a health hazard. Batteries may explode if damaged or exposed to very
high temperatures, causing poisoning, burns, acid burns or environmental
pollution. Careless disposal may permit unauthorized and improper use of
the equipment. This may result in serious personal injury, injury to third
parties and pollution of the environment.
CAUTION
Dispose of defective batteries without delay. Keep them out of reach of
children. Do not attempt to open or dismantle batteries and do not dispose
of them by incineration.
CAUTION
Dispose of the batteries in accordance with national regulations or return
them to Hilti.
Most of the materials from which Hilti power tools or appliances are
manufactured can be recycled. The materials must be correctly separated
before they can be recycled. In many countries, Hilti has already made
22
Printed: 30.09.2013 | Doc-Nr: PUB / 5071630 / 000 / 02
Possible cause
Electrical fault.
The power tool has been
overloaded (application
limits exceeded).
The battery is
discharged.
The tool is overloaded
(application limits ex-
ceeded).
Remedy
Switch the power tool off
immediately, remove the
battery and contact Hilti
Service.
Use the right power tool
for the job (don't use a
low-powered tool for
heavy work).
Charge the battery.
Use the right power tool
for the job (don't use a
low-powered tool for
heavy work).