Disposal; Warranty - Hilti UH 650 Operating Instructions Manual

11. Disposal

Most of the materials from which Hilti electric tools are manufactured can be recycled. The materials must be cor-
rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking
back your old electric tools for recycling. Please ask your Hilti customer service department or Hilti representa-
tive for further information.
Should you wish to return the electric tool yourself to a disposal facility for recycling, proceed as follows: Dis-
mantle the electric tool as far as possible without the need for special tools. Use absorbent paper to wipe oily parts
clean and to collect any grease that runs out. This paper should also be disposed of correctly. On no account should
grease be allowed to enter the waste water system or to find its way into the ground.
The individual parts should be separated as follows:
Part/assembly
Toolbox
Gear housing
Bearing plate
Grip, side handle
Motor housing
Fan
Motor (rotor and stator)
Supply cord
Gearing parts
Screws, small parts

12. Warranty

Hilti warrants that the tool supplied is free of defects
in material and workmanship. This warranty is valid
so long as the tool is operated and handled correctly,
cleaned and serviced properly and in accordance with
the Hilti Operating Instructions, all warranty claims
are made within 12 months from the date of the sale
(invoice date), and the technical system is main-
tained. This means that only original Hilti consum-
ables, components and spare parts may be used in
the tool. This warranty provides the free-of-charge
repair or replacement of defective parts only. Parts
requiring repair or replacement as a result of normal
wear and tear are not covered by this warranty.
Under no circumstances will Hilti be obligated for
direct, indirect, incidental or consequential dam-
ages, losses or expenses in connection with, or by
reason of, the use of, or inability to use the tool for
any purpose. Hilti specifically excludes the implied
warranties of merchantability and fitness for a par-
ticular purpose.
For repair or replacement, send tool and/or related
parts immediately upon discovery of the defect to the
address of the local Hilti marketing organization pro-
vided.
Printed: 07.07.2013 | Doc-Nr: PUB / 5071287 / 000 / 00
Part/assembly
Plastic
Plastic
Aluminium
Plastic
Plastic
Plastic
Steel and copper
Copper, synthetic rubber
Steel
Steel
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contempo-
raneous comments and oral or written agreements
concerning warranties.
Part/assembly
Plastics recycling
Plastics recycling
Scrap metal
Plastics recycling
Plastics recycling
Plastics recycling
Scrap metal
Scrap metal
Scrap metal
Scrap metal
en
9