Manufacturer's Warranty - Tools; Disposal; Ec Declaration Of Conformity (Original) - Hilti DD EC-1 Operating Instructions Manual

Manufacturer's warranty – tools
Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire lifes-
pan of the tool. Parts requiring repair or replacement as
a result of normal wear and tear are not covered by this
warranty.
Additional claims are excluded, unless stringent nation-
al rules prohibit such exclusion. In particular, Hilti is
not obligated for direct, indirect, incidental or conse-
quential damages, losses or expenses in connection
with, or by reason of, the use of, or inability to use the
tool for any purpose. Implied warranties of mer-
chantability or fitness for a particular purpose are
specifically excluded.
For repair or replacement, send tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.

Disposal

Most of the materials from which Hilti power
tools are manufactured can be recycled. The
materials must be correctly separated before
they can be recycled. In many countries, Hilti has already
made arrangements for taking back your old electric tools
for recycling. Please ask your Hilti customer service
department or Hilti sales representative for further infor-
mation.
Handling drilling and sawing slurry
Working with diamond tools on mineral materials (e.g.
concrete) in a wet process produces drilling or sawing
slurry. As with fresh cement mortar, it may cause irrita-
tion if allowed to come into contact with the skin or eyes.
Wear protective clothing, protective gloves and goggles.
With regard to environmental aspects, allowing these
slurries to flow directly into rivers, lakes or the sewer-
age system without suitable pre-treatment is problem-
atical.
Disposal procedure
In addition to the following recommended pre-treatment
procedures, the applicable national regulations must be
Printed: 08.07.2013 | Doc-Nr: PUB / 5069612 / 000 / 01
observed when disposing of drilling or sawing slurry.
Ask the local authorities concerned for further informa-
tion.
Recommended pre-treatment
■ Collect the drilling or sawing slurry (e.g. using a suit-
able industrial vacuum cleaner).
■ The fine content of the drilling or sawing slurry should
be separated from the water by allowing it to settle
(e.g. leave standing for some time or add a coagu-
lation agent).
■ Solid material from the drilling or sawing slurry
should be deposited at a construction waste dis-
posal site.
■ Water from the drilling or sawing slurry should be
neutralised (e.g. by adding a large quantity of water
or other neutralisation agents) before it is allowed to
flow into the sewerage system.
Only for EU countries
Disposal of electric tools together with household waste
is not permissible!
In observance of European Directive on waste electrical
and electronic equipment and its implementation in
accordance with national law, electric tools that have
reached the end of their life must be collected separately
and returned to an environmentally compatible recycling
facility.

EC declaration of conformity (original)

Designation: Diamond core drilling machine
Type:
Year of design:
We declare, under our sole responsibility, that this
product complies with the following directives and
standards: 2006/42/EC, 2004/108/EC, EN 60745-1, EN
60745-2-1, EN ISO 12100, 2011/65/EU.
Hilti Corporation, Feldkircherstrasse 100,
FL-9494 Schaan
Paolo Luccini
Head of BA Quality & Process Management
BA Electric Tools & Accessories
01/2012
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH,
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
DD EC-1
2000
Johannes W. Huber
Senior Vice President
Business Unit Diamond
01/2012
23