Disposal - Hilti UH 240-A Operating Instructions Manual

12. Disposal

Most of the materials from which Hilti power tools are manufactured can be recycled. The materials must be cor-
rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking
back your old electric tools for recycling. Please ask your Hilti customer service department or Hilti sales repre-
sentative for further information. Should you wish to return the electric tool yourself to a disposal facility for recy-
cling, proceed as follows: Dismantle the tool as far as possible without the need for special tools. Use absorbent
paper to wipe greasy parts clean and collect any grease that runs out. This paper should also be disposed of cor-
rectly. On no account should grease be allowed to enter the waste water system or find its way into the ground.
Separate the individual parts as follows:
Part / assembly
Toolbox
Outer casing
Electronic switch
Motor
Gearing parts
Battery
Screws, small parts
* **
Disposal
Batteries
The Hilti B24/2.0 NiCd and B24/2.4 NiCd battery has 20 nickel-cadmium cells.
The Hilti B24/3.0 NiMH battery has 20 nickel-metal hydrid cells.
Both you and Hilti bear the responsibility for recycling of the worn-out batteries in
keeping with environmental protection requirements.
Important: Do not throw worn-out batteries into household waste, a fire or water.
Dispose of the batteries in accordance with national regulations or return them to
Hilti.
Printed: 07.07.2013 | Doc-Nr: PUB / 5071285 / 000 / 00
Main material
Plastic
Plastic / synthetic rubber
Various
Steel, copper
Steel
Nickel-cadmium
Nickel-metal hydride
Steel
* Return waste material for recycling.
** Dispose of the battery in accordance with national regulations or return used
batteries to Hilti for recycling.
Recycling
Plastics recycling
Plastics recycling
Electronics scrap
Scrap metal
Scrap metal
**
Scrap metal
en
9