Dräger Babylog 8000 Technical & Service Manual page 151

Technical Information
Technical Documentation for Babylog 8000 plus
according to EMC standard IEC/EN 60601-1-2: 2001
General Information
The EMC conformity includes the use of following external cables, transducers and accessories (see the
following table):
Designation
Flow sensor
Flow sensor connecting cable
Communication conversion kit
Analog cable
MIB connecting cable
Additionally, accessories may be used which do not affect EMC compliance, if no other reasons interdict the
use of them (see chapter Order List in the Instructions for Use manual). Non-compliance may result in
increased emissions or decreased immunity of the Babylog 8000 plus.
Babylog 8000 plus should not be used adjacent to or stacked with other equipment. If adjacent or stacked
use is inevitable, Babylog 8000 plus should be observed to verify normal use in the configuration in which it
will be used.
Other equipment which can be used adjacent to or stacked with the Babylog 8000 plus are listed in the
Instructions for Use manual, in the Order List chapter or in the following table.
Designation
Fisher & Paykel humidifier - accessories
Optional graphic screen
ECG monitoring
Order no.
8410185
8409626
8411108
8306487
5198952
Order no.
84 14 144
84 15 834
Various, on demand
Page 1 of 4
2004-09-24