Configuring The Gv-Hot Swap Dvr/Nvr V5 For Pal - GeoVision V5 User Manual

Getting Started
3
3.15.2

Configuring the GV-Hot Swap DVR/NVR V5 for PAL

The default video standard after the system restoration is set to NTSC. If the video standard in
your country is PAL, remember to configure the GV-Hot Swap DVR/NVR V5 for PAL.
1. Click the Configure button, point to A/V Setting, and then select Video Source.
Figure 3-67
2. In the Video Standard field, select PAL from the drop-down list, and click OK.
Figure 3-68
87