GeoVision V5 User Manual page 68

To change the static IP addresses or to enable dynamic IP address, follow the steps below.
•
For GV-Hot Swap DVR/NVR V5 and GV-Hot Swap VMS V5, start from step 1.
•
For GV-Hot Swap Recording Server System and GV-Hot Swap Backup Center System,
select Control Panel and skip to step 3.
1. On the GV-Desktop, click the Programs button, and then select Control Panel.
Figure 3-38
2. Type the ID and password. The default ID and password are "0000". The Control Panel
window appears.
3. Under Network and Internet, click View network status and tasks.
4. Under Connections, select the Local Area Connection you want to configure.
60
Figure 3-39