Chapter 2 Frame Relay Testing
Configuring the frame header settings
Configuring the frame header settings
14
Setting
User 2 Data
(User 2 Data
payload only)
4 Do one of the following:
– To configure other test settings, press a different soft
key.
– To return to the test result display area, press the
Home navigation key.
The frame load settings are configured.
You can specify characteristics for the frame header such as
transmit (Terminate mode only) and receive DLCIs, and
whether the transmit control bits (DE, FECN, BECN, and C/R)
are active.
To specify frame header settings
1 Access the test configuration menus. See
test configuration menus" on page
2 Press the FR HEADER soft key.
HST-3000 Frame Relay Testing User's Guide
Parameters
Enter a hexidecimal value from 1 to
64 bytes long.
8.
"Accessing the