Overwriting A Configuration; Deleting A Configuration - JDS Uniphase HST-3000 User Manual

Chapter 2 Frame Relay Testing
Managing test configurations
Overwriting a
configuration
Deleting a
configuration
22
3 Press the 1 key.
4 Select the file name to load.
5 Press the OK key.
The test configuration is loaded.
You can change a saved configuration then overwrite the old
version.
To overwrite a configuration
1 Press the Configure navigation key.
2 Press the Storage soft key.
3 Press the 3 key.
4 Select the file name to overwrite.
5 Press the OK key.
The test configuration is overwritten.
If a configuration is no longer needed, you can delete it.
To delete a test configuration
1 Press the Configure navigation key.
2 Press the Storage soft key.
3 Press the 4 key.
4 Select the file name to delete.
5 Press the OK key.
The test configuration is deleted.
HST-3000 Frame Relay Testing User's Guide