Setting The Display Of Media Remain; Setting Time; Setting Unit (Temperature/ Length); Setting A Key Buzzer - MIMAKI UJV55-320 Operation Manual

Setting the Display of Media Remain

Whether the screen displays the remaining amount of a
media is set.
the remaining amount of a media is
When the media
displayed in Remote.
remaining amount
(However, when a leaf media is used,
display is turned to
the length of the media to be printed is
"ON"
displayed.)
When the media
remaining amount the remaining amount of a media is not
display is turned to displayed in the Remote.
"OFF"
• The displayed amount of a media is a rough
indication. It may be different from the actual
remaining amount.
• The amount of a media that has been fed by the
printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the
remaining amount) is entered when a roll media is
detected.( P.2-10)
• The setting configured here does not become
effective unless media detection is performed after
the setting has been complete.
1
Press the
2
Press to select "Machine Setup",
and press the
3
Press to select "Media Remain",
and press the
4
Press to select ON/OFF.
5
Press the
6
Press the
end the setting.

Setting Time

You can set time of your country (time difference).
1
Press the
2
Press to select "Machine Setup",
and press the
3
Press to select "TIME" , and
press the
4
Press () .
• You will be able to change the time.
(MENU) in Local.
key.
key.
key.
key several times to
(MENU) in Local.
key.
key.
5
Press
press the
• Year/Month/Day/Time selecting:
by the [][] keys.
• Year/Month/Day/Time inputting:
by the [][] keys.
6
Press the
end the setting.
• As for the time difference, -20 hours to +4 hours
can be set.

Setting Unit (Temperature/ Length)

Units used by this machine are set.
1
Press the
2
Press to select "Machine Setup",
and press the
3
Press the
4
Press to select "Unit/Temp" or
"Unit/Length", and press the
5
Press to select a set value, and
press the
• Set value of tempture : °C / °F
• Set value of length
6
Press the
end the setting.

Setting a Key Buzzer

You can turn off the buzzer sound when pressing the key.
1
Press the
2
Press to select "Machine Setup",
and press the
3
Press the
4
Press to select "Key Buzzer" ,
and press the
5
Press to select a set value, and
press the
• Set value : ON/ OFF
6
Press the
end the setting.
• The buzzer sound is not disabled for errors,
warnings and/or operation completion even if this
setting is set to "OFF".
to enter time, and
key.
key several times to
(MENU) in Local.
key.
(>>) .
key.
key.
: mm / inch
key several times to
(MENU) in Local.
key.
(>>) .
key.
key.
key several times to
3
2
2
3-15