ALP Format Medium Command
This vendor unique Format Medium command is used to start a new ALP logical
volume. The command must be issued only after positioning the tape to the
beginning of an ALP. After this Format Medium command is processed writes will
start a block ID 0.
TABLE C-3 Format Medium Command
Byte
7
0
1
2
3
thru
4
5
RSVD
Parameter
Verify:
Immed: Immediate
Format
Transfer Length
ALP
August 2016
6
5
Page Code (04h)
Reserved
Reserved
ALP
Value
0 = Do not verify format operation.
0 = Return status after format completes.
8h = Vendor unique - start new ALP logical volume.
0000h = No data is transferred for format medium command.
1 = Start new ALP logical volume.
Bit
4
3
Transfer Length
Control Byte
Automatically Linked Partitioning 277
ALP Format Medium Command
2
1
Verify
Immed
Format
0