Table 3-110 Read Buffer Descriptor; Table 3-111 Echo Buffer Descriptor - Oracle StorageTek T10000 Reference Manual

• The dump buffer may contain multiple dumps up to a maximum of 12 MB of
• The maximum amount of permanent error trace data or event log data is
• If no data remains to be transferred, Check Condition status is returned. The

TABLE 3-110 Read Buffer Descriptor

Byte 7
0
1 (MSB)
thru
2
Parameter
Offset Boundary
Buffer Capacity

TABLE 3-111 Echo Buffer Descriptor

Byte 7
0
1 (MSB)
2 Reserved
3 Buffer Capacity
Parameter
Buffer Capacity
EBOS: Echo Buffer Overwritten
Supported
August 2016
data.
524KB.
sense key is set to Blank Check with the valid bit set.
6 5
Value
FFh = 0 is the only supported offset boundary
Size of selected buffer in bytes
6 5
(LSB) (MSB)
Value
Size of Echo Buffer in the bytes aligned to a four byte boundary.
Maximum size is 4096 bytes
1 = Supported. Illegal Request, echo buffer overwritten additional
sense code is returned if data was not previously written by the
same initiator.
Bit
4 3
Offset Boundary
Buffer Capacity
Bit
4 3
Reserved
Reserved
Read Buffer Command
2 1 0
2 1 0
EBOS
Buffer Capacity
Commands 157
(LSB)
(LSB)