Load Display Command; Load Display Data Format; Table 3-6 Control Byte; Table 3-19 Load Display Command - Oracle StorageTek T10000 Reference Manual

Load Display Command

The Load Display command (vendor specific) displays ASCII messages on the virtual
operator panel for that device. This command transfers 17 bytes of data to the
display. The data transferred contains one byte of display control data and two, eight-
byte ASCII messages.

TABLE 3-19 Load Display Command

Byte 7
0
1
2
3
4
5

Load Display Data Format

TABLE 3-20 Load Display Data Bytes

Byte 7
0
1 (MSB)
thru
8
9 (MSB)
thru
16
Notes:
• Messages in bytes 1–8 and 9–16 use the ASCII printable character set.
• Non-printable characters are displayed as blanks.
• The format control byte controls the way the device displays the remaining 16
August 2016
6 5
Operation Code (06h)
6 5
Overlay
bytes.
Bit
4 3
Reserved
Reserved
Reserved
Transfer Length (11h)
Control Byte
Bit
4 3
Alt Blink
(ASCII) Message 1
(ASCII) Message 2
Load Display Command
2 1
2 1
L/H Reserved
Commands 57
0
0
(LSB)
(LSB)