Tapealert Flags; Table 3-38 Tapealert Flags - Oracle StorageTek T10000 Reference Manual

TapeAlert Flags

TABLE 3-38 TapeAlert Flags

Code Flag Name
0001h Read Warning
0002h Write Warning
0003h Hard Error
0004h Media
0005h Read Failure
0006h Write Failure
0007h Media Life
0008h Not Data Grade
0009h Write Protect
000Ah No Removal
000Bh Cleaning Media
000Ch Unsupported Format
000Dh Recoverable Snapped Tape
000Eh Unrecoverable Snapped Tape
000Fh Memory Chip in Cartridge Failure The RFID chip cannot be read or written to.
0010h Forced Eject
0011h Read Only Format
0012h Tape Directory Corrupted
0013h Nearing Media Life
0014h Clean Now
0015h Clean Periodic
0016h Expired Cleaning Media
0017h Invalid Cleaning Media
0018h Retention Requested
0019h Dual port interface error
August 2016
Description
Drive has difficulty reading
Drive has difficulty writing
Write or read hard error has occurred
(flags 4, 5, 6)
Unrecoverable read, write, or positioning
error caused by faulty media
Hard read error, hardware or media
Hard write error, hardware or media
Media has exceeded the life pass count
Not supported
Write command was issued to a write-
protected tape
A manual unload or Unload command was
issued while the drive was in prevent
removal state – not supported
The tape in the drive is a cleaning cartridge
Unrecognized format
Snapped tape – not supported
Not supported
A manual eject was performed before a
reposition to BOT was commanded.
Not supported
Not supported
MIR corrupted
The tape is nearing the end of its
calculated life
The drive has determined it needs cleaning.
Cleaning counter has reached threshold,
cleaning LED is on
The last cleaning cartridge inserted was used
up – not supported
Not supported
Not supported
Not supported
Log Sense Command
Length
(bytes)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Commands 73