Report Supported Operation Codes Command
One_Command Parameter Data Format
The Report Supported Operation Codes One_Command Parameter Data Format
contains information and a usage map for bits in the CDB for the command and
service action field.
TABLE 3-134 One_Command Parameter Data
Byte
7
0
1
CTDP
2
(MSB)
thru
3
4
(MSB)
thru
n
n+1
(MSB)
thru
n+12
Parameter
CTDP: Command Timeouts
Descriptor Present
Support
180 T10000: Interface Reference Manual
6
5
4
Reserved
CDB Size (n-3)
CDB Usage Data
Command Timeouts Descriptor
(see
TABLE 3-135 on page
Value
Command Timeouts Descriptor Present
0 = Indicates the command timeouts descriptor is not included in the
parameter data
1 = Indicates the command timeouts descriptor is included in the
parameter data (see
000b
Data about the requested SCSI command is not
currently available. All data after byte 1 is not valid. A
subsequent request for command support data may be
successful.
001b
The device server does not support the requested
command. All data after byte 1 is undefined.
010b
Reserved
011b
The device server supports the requested command in
conformance with a SCSI standard. The parameter data
format conforms to the definition in
100b
Reserved
101b
The device server supports the requested command in
a vendor specific manner. The parameter data format
conforms to the definition in
110b to 111b
Reserved
Bit
3
2
Reserved
182)
TABLE 3-135 on page
182)
1
0
Support
(LSB)
(LSB)
(LSB)
TABLE
3-134.
TABLE
3-134.
August 2016