Mobotix D15 Manual page 4

4
/112
D15 Camera Manual
2.2 Network Connections Overview
2.2.1 Power-Over-Ethernet (PoE Conforming to IEEE 802.3af)
2.2.2 Uninterruptible Power Supplies (UPS)
2.2.3 Preparing the Camera Connections, Wall Outlets
2.2.4 Wiring, Fire Prevention, Lightning and Surge Protection
2.3 First Installation Steps
2.3.1 Mounting Lens Units
2.3.2 Overview of Cable Connections
2.3.3 Connecting the Ethernet Cable with the MX-Overvoltage-Protection-Box
2.3.4 Connecting the MiniUSB Cable
2.3.5 Connecting MxBus Modules
2.3.6 Replacing the MicroSD Card
2.4 Mounting the Camera with Outdoor Wall Mount
2.4.1 Aiming the Passive Infrared Sensor (PIR)
2.4.2 Mounting the Outdoor Wall Mount
2.4.3 Aiming the Camera
2.4.4 Connecting the Camera with Bottom Plate
2.4.5 Connecting And Securing The Camera
2.5 Mounting the Corner and Pole Mount
2.5.1 Overview
2.5.2 Mounting to the Corner of a Building
2.5.3 Mounting to a Pole
2.5.4 Mounting the Outdoor Wall Mount
2.6 Adjusting the Lens
2.7 Network and Power Connection
2.7.1 Notes on Cable Lengths and Power Supply
2.7.2 Power Supply with Power-Over-Ethernet Products
2.7.3 Power Supply Using a Switch
2.7.4 Power Supply When Connected Directly to a Computer
2.7.5 Variable PoE
2.7.6 Camera Startup Sequence
3 Operating the Camera
3.1 Manual and Automatic Operation - Overview
3.2 First Images and the Most Important Settings
3.2.1 Manually Setting Up the Network Parameters in a Browser
3.2.2 First Images and the Most Important Settings in the Browser
3.2.3 First Images and Network Parameter Configuration in MxMC
3.2.4 Starting the Camera with Factory (Network) Settings
3.2.5 Starting the Camera with an Automatic IP Address (DHCP)
3.3 Virtual PTZ and Full Image Recording
3.3.1 Virtual PTZ
3.3.2 Full Image Recording
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
44
44
45
45
46
48
48
52
53
53
55
56
58
58
59
61
62
63
64
64
65
66
67
68
69
69
69
70
71
72
73
74
74
76
76
79
81
84
85
86
86
88