Mobotix D15 Manual page 60

60
/112
The folded drilling
templates can be found
at the end of the manual
Make sure that the drill-
ing template is not scaled
down when printing
Silicon for rough
plaster
D15 Camera Manual: Mounting
Use the supplied drilling template (fold-out at the end of this manual) to mark the posi-
tion for drilling the anchor holes and the holes through which the cables will be led later
on. Make sure that it is not scaled down when printing or copying the drilling template.
1. Use the supplied screw anchors (10 mm), screws
(8x70 mm) and washers (diam. 9 mm) to secure
the Outdoor Wall Mount.
2. Attach the supplied wall sealing to the rear side
of the wall mount. If the Outdoor Wall Mount is
mounted to a very rough surface, the top of it
should be subsequently sealed against the wall
using silicon.
3. The rectangular opening on the rear of the wall mount
is intended to cover the installed in-wall socket or a
MOBOTIX interface box.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com