Access Control - Draytek VigorAP 910C User Manual

After finishing this web page configuration, please click OK to save the settings.
3 . 1 0 . 3 A c c e s s C o
3 . 1 0 . 3 A c c e s s C o
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights (deny or allow).
Available settings are explained as follows:
Item
Policy
MAC Address Filter
Client's MAC
Address
Add
Delete
Edit
n t r o l
n t r o l
Description
Select to enable any one of the following policy or disable the
policy. Choose Activate MAC address filter to type in the
MAC addresses for other clients in the network manually.
Choose Blocked MAC address filter, so that all of the devices
with the MAC addresses listed on the MAC Address Filter
table will be blocked and cannot access into VigorAP 910C.
Display all MAC addresses that are edited before.
Manually enter the MAC address of wireless client.
Add a new MAC address into the list.
Delete the selected MAC address in the list.
Edit the selected MAC address in the list.
149
VigorAP 910C User's Guide