Bandwidth Management - Draytek VigorAP 910C User Manual

AckPolicy
After finishing this web page configuration, please click OK to save the settings.
3 . 1 0 . 8 B a n d w
3 . 1 0 . 8 B a n d w
The downstream or upstream from FTP, HTTP or some P2P applications will occupy large
of bandwidth and affect the applications for other programs. Please use Bandwidth
Management to make the bandwidth usage more efficient.
Available settings are explained as follows:
Item
SSID
Enable
Upload Limit
Download Limit
Auto Adjustment
VigorAP 910C User's Guide
restrict stations from using specific category class if it is
checked.
Note: VigorAP 910C provides standard WMM configuration in
the web page. If you want to modify the parameters, please refer
to the Wi-Fi WMM standard specification.
"Uncheck" (default value) the box means the AP will answer the
response request while transmitting WMM packets through
wireless connection. It can assure that the peer must receive the
WMM packets.
"Check" the box means the AP will not answer any response
request for the transmitting packets. It will have better
performance with lower reliability.
i d t h M a n a g e m e n
i d t h M a n a g e m e n
Description
Display the specific SSID name.
Check this box to enable the bandwidth management for clients.
Define the maximum speed of the data uploading which will be
used for the wireless stations connecting to VigorAP with the
same SSID.
Use the drop down list to choose the rate. If you choose User
defined, you have to specify the rate manually.
Define the maximum speed of the data downloading which will
be used for the wireless station connecting to VigorAP with the
same SSID.
Use the drop down list to choose the rate. If you choose User
defined, you have to specify the rate manually.
Check this box to have the bandwidth limit determined by the
t
t
154