Table of Contents
Advertisement
Click the link of RADIUS Server to access into the following page for more settings.
Use internal RADIUS
Server
IP Address
Port
Shared Secret
Session Timeout
3
.
4
.
3
A
c
c
e
s
s
C
o
3
.
4
.
3
A
c
c
e
s
s
C
o
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights (deny or allow).
Enable - Enable the WEP Encryption.
Such feature is available for WEP/802.1x mode.
There is a RADIUS server built in VigorAP 800 which is used
to authenticate the wireless client connecting to the access
point. Check this box to use the internal RADIUS server for
wireless security.
Besides, if you want to use the external RADIUS server for
authentication, do not check this box.
Please refer to the section, 3.10 RADIUS Server to configure
settings for internal server of VigorAP 800.
Enter the IP address of external RADIUS server.
The UDP port number that the external RADIUS server is
using. The default value is 1812, based on RFC 2138.
The external RADIUS server and client share a secret that is
used to authenticate the messages sent between them. Both
sides must be configured to use the same shared secret.
Set the maximum time of service provided before
re-authentication. Set to zero to perform another authentication
immediately after the first authentication has successfully
completed. (The unit is second.)
n
t
r
o
l
n
t
r
o
l
35
VigorAP 800 User's Guide
Hide quick links:
Advertisement
Table of Contents
