Draytek VigorAP 910C User Manual page 61

Available settings are explained as follows:
Item
Enable Wireless LAN
Enable Limit Client
Mode
Enable
Hide SSID
SSID
Description
Check the box to enable wireless function.
Check the box to set the maximum number of wireless stations
which try to connect Internet through Vigor AP. The number
you can set is from 3 to 64.
VigorAP 910C can connect to stations supporting 11b only, 11g
only, 11n only, Mixed (11b+11g), Mixed (11g+11n) and Mixed
(11b+11g+11n) for 2.4GHz simultaneously.
Check the box to enable the SSID configuration.
Check it to prevent from wireless sniffing and make it harder
for unauthorized clients or STAs to join your wireless LAN.
Depending on the wireless utility, the user may only see the
44information except SSID or just cannot see any thing about
VigorAP 910C while site surveying. The system allows you to
set three sets of SSID for different usage.
Set a name for VigorAP 910C to be identified. Default settings
51
VigorAP 910C User's Guide