Draytek VigorAP 910C User Manual page 179

Each item is explained as follows:
Item
SSID
BSSID
RSSI
Channel
Encryption
Authentication
Scan
AP's MAC Address
AP's SSID
Select as Universal
Repeater
Description
Display the SSID of the AP scanned by VigorAP 910C.
Display the MAC address of the AP scanned by VigorAP
910C.
Display the signal strength of the access point. RSSI is the
abbreviation of Received Signal Strength Indication.
Display the wireless channel used for the AP that is scanned by
VigorAP 910C.
Display the encryption mode for the scanned AP.
Display the authentication type that the scanned AP applied.
It is used to discover all the connected AP. The results will be
shown on the box above this button
If you want the found AP applying the WDS settings, please
type in the AP's MAC address.
To specify an AP to be applied with WDS settings, you can
specify MAC address or SSID for the AP. Here is the place
that you can type the SSID of the AP.
In Universal Repeater mode, WAN would work as station
mode and the wireless AP can be selected as a universal
repeater. Choose one of the wireless APs from the Scan list.
169
VigorAP 910C User's Guide